wireguard
- j
jolly-london-20127
01/23/2022, 4:01 PMI'm gonna post this question on our GitHub as our first general WireGuard question: Is anyone using WireGuard for LAN gaming? https://github.com/gravitl/netmaker/issues/640 - s
straight-lock-3524
01/23/2022, 4:47 PMI've done it once, as long as the game just uses LAN ip's your fine most of the time (the RA3 question is there is a bit strange yes, but it had issues back in the day with normal LAN as well) - r
rich-addition-44259
01/24/2022, 2:27 PMI didn't have issues with game clients connecting from within the network and from outside through relays. As I outlined, it adds maybe a 10ms delay, but it was not critical - j
jolly-london-20127
01/25/2022, 12:23 PMGood to have some feedback. Sounds like in any case this should be considered a WireGuard issue rather than Netmaker. I wonder if anyone has some best practices for gaming over WireGuard, for instance MTU settings? - s
straight-lock-3524
01/26/2022, 6:56 PMI don't think there are much best practices then what you already do - f
fancy-kite-9291
02/14/2022, 6:52 PMqq all - f
fancy-kite-9291
02/14/2022, 6:53 PMI need to make a wireguard chain, I can do it with ? - b
bored-island-21407
02/14/2022, 6:56 PMwhat do you mean by wireguard chain? - f
fancy-kite-9291
02/14/2022, 6:58 PMclient > vpn1 > vpn2 > vpn3 > internet vpn = wireguard - f
fancy-kite-9291
02/14/2022, 6:59 PMi can do it with netmaker ? - b
bored-island-21407
02/14/2022, 7:00 PMyes if you set up 3 networks and create gateways on each of the networks - f
fancy-kite-9291
02/14/2022, 7:01 PMI just put netmaker on 3 VPS and set it up there? - f
fancy-kite-9291
02/14/2022, 7:01 PMWill clients be able to use the standard wireguard app? - b
bored-island-21407
02/14/2022, 7:02 PMyou only need netmaker on one server. You would need to have multiple nodes running netclient. - b
bored-island-21407
02/14/2022, 7:03 PMyes, if the vpn1 node is an ingress gateway then the client can be an external client which runs regular wireguard. - f
fancy-kite-9291
02/14/2022, 7:04 PMwell, I can redirect traffic to vpn 3 right? - f
fancy-kite-9291
02/14/2022, 7:05 PMthe domain is necessarily necessary for netmaker? - b
bored-island-21407
02/14/2022, 7:06 PMThe netmaker server needs a public ip - f
fancy-kite-9291
02/14/2022, 7:06 PMand nothing else? oh my god this looks like what i was looking for - b
bored-island-21407
02/14/2022, 7:07 PMa domain name is needed to have secure (https) communications - f
fancy-kite-9291
02/14/2022, 7:08 PMhttps://netmaker.readthedocs.io/en/master/quick-start.html Can I use this for setup? - b
bored-island-21407
02/14/2022, 7:10 PMyes - f
fancy-kite-9291
02/14/2022, 7:13 PMNow, insert the values for your base (wildcard) domain, public ip, and coredns ip.** i dont have domain, i can skip it ? - j
jolly-london-20127
02/14/2022, 7:13 PMif you use the installer from the README it will just use nip.io for a domain, which should be fine - f
fancy-kite-9291
02/14/2022, 7:30 PMI have installed the control panel, now I need to add clients and send traffic through them, right? - b
bored-island-21407
02/14/2022, 7:33 PMyou need to think how you are going to set up your networks? did you want vpn1, vpn2, and vpn3 on the same or different networks? - f
fancy-kite-9291
02/14/2022, 7:34 PMin fact, it doesn’t matter, the main thing is that the client’s ip address is like that of vpn3 - b
bored-island-21407
02/14/2022, 7:35 PMso what is the purpose of vpn1 and vpn2... just make vpn3 an ingress and egress gateway and connect the client to vpn3 - f
fancy-kite-9291
02/14/2022, 7:44 PMdid I understand correctly that I need to add a client ( vpn2 and vpn3 servers via add client ?) - f
fancy-kite-9291
02/14/2022, 7:46 PMFor Linux and Mac clients, install with the following command: curl -sfL https://raw.githubusercontent. I mean use it?