general
- k
kind-action-82370
05/07/2021, 8:28 PMStill the same: Decoded values from token: Server: 84.xxx.xx.xx:50051 - k
kind-action-82370
05/07/2021, 8:29 PMError installing: rpc error: code = Unavailable desc = connection error: desc = "transport: Error while dialing dial tcp 84.00..... - k
kind-action-82370
05/07/2021, 8:29 PMis docker-compose down and up enough? or do i need to remove the volumes? - j
jolly-london-20127
05/07/2021, 8:39 PMHmmm that should be enough...can you also try setting SERVER_HTTP_HOST and SERVER_GRPC_HOST to your lan ip? - k
kind-action-82370
05/07/2021, 8:41 PMLike so - k
kind-action-82370
05/07/2021, 8:42 PMits the same result - j
jolly-london-20127
05/07/2021, 8:43 PMohhh lol - j
jolly-london-20127
05/07/2021, 8:43 PMthat's the netmaker-ui section - j
jolly-london-20127
05/07/2021, 8:43 PMyou need to set it in the netmaker environment section - k
kind-action-82370
05/07/2021, 8:50 PMoh no lol - k
kind-action-82370
05/07/2021, 8:51 PMYesDecoded values from token: Server: 10.30.66.115:50051 Network: default Key: c7AxTpL8IGuT4NbA Local Range: Not a local network. Will use public address for endpoint. SERVER SETTINGS: Server: 10.30.66.115:50051 - k
kind-action-82370
05/07/2021, 8:51 PMBut why is it saying: Local Range: Not a local network. Will use public address for endpoint. ?? - k
kind-action-82370
05/07/2021, 8:53 PMAnd i got a strange ping reply from client to server 😄 - k
kind-action-82370
05/07/2021, 8:53 PMroot@netmcliett1:~# ping 10.10.10.1 PING 10.10.10.1 (10.10.10.1) 56(84) bytes of data. From 10.10.10.2 icmp_seq=1 Destination Host Unreachable ping: sendmsg: Required key not available From 10.10.10.2 icmp_seq=2 Destination Host Unreachable ping: sendmsg: Required key not available From 10.10.10.2 icmp_seq=3 Destination Host Unreachable ping: sendmsg: Required key not available ^C --- 10.10.10.1 ping statistics --- 3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 37ms - k
kind-action-82370
05/07/2021, 8:55 PMI gonne leave it at that for today, see you later - j
jolly-london-20127
05/07/2021, 8:57 PMDid you set the network as a local network? - j
jolly-london-20127
05/07/2021, 8:57 PMThere is a flag on network creation to make it LAN based, otherwise it will assume WAN - j
jolly-london-20127
05/07/2021, 8:58 PMOk, let me know when you pick it back up! This is very helpful for me to increase use-ability, so thanks for going through this. - u
user
05/07/2021, 11:23 PM@User that was it. Legend. Thanks so much! - k
kind-action-82370
05/08/2021, 7:15 AMNo i am just using the default one, let me test a custom network - k
kind-action-82370
05/08/2021, 7:21 AMI dont like the position of create network. it took me far to long to find it lol - k
kind-action-82370
05/08/2021, 7:25 AMalso: why do i need to input my local lan ip range? - j
jolly-london-20127
05/08/2021, 12:23 PMThat’s just if you’re creating a network where nodes should reach each other with their lan ips, otherwise leave it blank - k
kind-action-82370
05/08/2021, 12:23 PMIt is mandatory - j
jolly-london-20127
05/08/2021, 12:25 PMOh you mean if you’ve selected the box - k
kind-action-82370
05/08/2021, 12:25 PMyeah you said that i need to create a local one - k
kind-action-82370
05/08/2021, 12:25 PMHere - j
jolly-london-20127
05/08/2021, 12:25 PMBecause otherwise it won’t know which private ip to use per node - k
kind-action-82370
05/08/2021, 12:25 PMBut i have different vlans at home with different IP ranges - j
jolly-london-20127
05/08/2021, 12:26 PMHow many machines?