Hi, the lasted version of netclient doesn't have the checkin command, right?

check-in

I'm wondering - is it a good idea to try running netclient on a home router? (Asus RT-AC86U, with 512 mb of RAM, dual core arm64, Asuswrt-Merlin) Right now when running I get the error due to missing binaries (my busybox doesn't contain stuff like

id

) which is probably fixable - just wondering if I should even try

FWIW I do have kernel wireguard and userspace tool(

wg

). When I tried using tailscale (which has a userspace impl of wireguard) I ran out of memory once I ran a speed test

anyone facing this

it's a vm

win10

.

How do I troubleshoot a Windows client that says it's connected but can't access anything and the node listing shows "error"

OpenWRT - Connectivity issues

Hey there, so I setup Netmaker on a AWS Lightsail (Ubuntu) machine to test. All ports are open and I am able to successfully connect clients. However, I cannot connect from my home network (Windows client) to a machine in a different network (it works with Tailscale though). The dashboard just shows the yellow warning badge and the Wireguard logs show the following error repeatedly:

Everthing runs on version 0.14.6. How can I investigate/fix this issue?

I think I missed a step with a new client I setup but when I added egress to the client it does not seem to allow traffic to CIDR range I put in

is there any addition client packages I need to install?

nm I figured it out

egress CIDR and network adapter you want to advertise

not an new adapter to be created

Hi, how can I update the netclient version shown in the dashboard?

netclient pull

doesn't seem to do it.

Upgrade

Hi all, has any of you ran into the issue that the generated configuration for external clients doesn't seem to work on Android? The same configuration works on e.g. my MacBook. The error thrown by the Wireguard app for Android is "bad address". Edit: I was unable to find anything related to this on GitHub and Discord. Edit 2: Running Netmaker 0.14.6 and 0.15.0 (just upgraded)

Hi all has any of you ran into the issue

Did you have any luck solving this? I'm having the same issue

I'm getting a segfault when trying to leave a network

Hello, I'm using Client 0.15.0 on Openwrt and it crash when setting that node as Egress, Ingress or Relay. This is what the log says:

[netclient] 2022-09-03 06:23:02 [mqhandlers.go-57] NodeUpdate(): network: home received message to update node Pueblo 
[netclient] 2022-09-03 06:23:02 [mqhandlers.go-131] NodeUpdate(): applying WG conf to /etc/netclient/config/nm-home.conf 
panic: runtime error: slice bounds out of range [1:0]

goroutine 50 [running]:
github.com/gravitl/netmaker/netclient/ncutils.RunCmds({0x40004ea4e0?, 0x3, 0x560d62?}, 0x0)
    /home/runner/work/netmaker/netmaker/netclient/ncutils/netclientutils.go:441 +0x1c0
github.com/gravitl/netmaker/netclient/wireguard.ApplyWithoutWGQuick(0x400040fc80, {0x400032a872, 0x7}, {0x4bcee0?, 0x40002bd790?})
    /home/runner/work/netmaker/netmaker/netclient/wireguard/noquick.go:95 +0x488
github.com/gravitl/netmaker/netclient/wireguard.ApplyConf(0x400040fc80, {0x400032a872, 0x7}, {0x4000444750, 0x22})
    /home/runner/work/netmaker/netmaker/netclient/wireguard/common.go:294 +0x13c
github.com/gravitl/netmaker/netclient/functions.NodeUpdate({0x6516f0, 0x40000ccb40}, {0x651338, 0x40003e0730})
    /home/runner/work/netmaker/netmaker/netclient/functions/mqhandlers.go:135 +0xac8
github.com/eclipse/paho%2emqtt%2egolang.(*router).matchAndDispatch.func2()
    /home/runner/go/pkg/mod/github.com/eclipse/paho.mqtt.golang@v1.4.1/router.go:214 +0x834
created by github.com/eclipse/paho%2emqtt%2egolang.(*router).matchAndDispatch
    /home/runner/go/pkg/mod/github.com/eclipse/paho.mqtt.golang@v1.4.1/router.go:173 +0x24c

Hello I m using Client 0 15 0 on Openwrt

I did not. Ended up running an Ubuntu VM instead.

Hey gang! Having some issues with joining my network on a linux client. When joining I'm getting some IPv6 (I guess?) related issues... How can I solve this?

[netclient] 2022-09-07 20:40:25 error installing:  error creating node 500 Internal Server Error {"Code":500,"Message":"address fe80::6842:456a:b567:fc18:51821: too many colons in address"}

That is also followed by

[netclient] 2022-09-07 20:40:25 error running command: wg-quick down /etc/netclient/config/.conf
[netclient] 2022-09-07 20:40:25 wg-quick: `/etc/netclient/config/.conf' does not exist

Hm I seem to be having some issue installing/upgrading netclient on a mac. jimmy@Jimbook-Pro ~ % brew install netclient ==> Downloading https://fileserver.netmaker.org/v0.15.1/darwin/netclient-amd64.tgz Already downloaded: /Users/jimmy/Library/Caches/Homebrew/downloads/8a42bd9fa73bdf59586a7f382586f0630b23004f7b29e13dcf18d02d3e2af0fa--netclient-amd64.tgz All formula dependencies satisfied. ==> Installing Cask netclient ==> Running installer script '/usr/local/Caskroom/netclient/0.15.1/install.sh' /Library/LaunchDaemons/com.gravitl.netclient.plist: service already loaded Load failed: 37: Operation already in progress ==> Linking Binary 'netclient' to '/usr/local/bin/netclient' chmod: Unable to change file mode on /Applications/netclient: Operation not permitted chmod: /Applications/netclient: Permission denied chmod: Unable to change file mode on /Applications/netclient: Operation not permitted ==> Unlinking Binary '/usr/local/bin/netclient' ==> Purging files for version 0.15.1 of Cask netclient Error: Failure while executing;

/bin/chmod -R -- 0755 /Applications/netclient

exited with 1. Here's the output: chmod: Unable to change file mode on /Applications/netclient: Operation not permitted chmod: /Applications/netclient: Permission denied chmod: Unable to change file mode on /Applications/netclient: Operation not permitted

brew upgrade seems broken...